Ordering a replacement KeyMaker Board

There will be no stock of KeyMaker replacement boards until after the pandemic is over.

NOTE: You MUST follow the appropriate Diagnostic instructions for your particular KeyMaker Board model, there are differences.

The Diagnostic procedures have evolved and changed between KM7,KMX8,KMX9,KM9A,KMX1 and KMX2.

Therefore you must find and follow the correct Diagnostic for your particular KeyMaker Board.

 Follow this link to find the correct Diagnostic instructions in the User's guide for your model KeyMaker

If you have run the appropriate Diagnostic for your particular KeyMaker Board and it fails more than once and you are CERTAIN you are following the instructions correctly then your KeyMaker Board has sustained damage and must be replaced.

To avoid damaging your new replacement board - DO READ THESE WARNINGS -

To replace your damaged KeyMaker board;

Before purchasing a replacement KeyMaker Board CHECK THAT your shipping address registered with PayPal is in fact your correct address.

Scroll down this page and select the correct KeyMaker replacement board for your damaged KeyMaker model..

Use the Buy Now button below to purchase the correct replacement KeyMaker Board.

The Replacement KeyMaker Board purchase price does include postage and handling.

You MUST post your damaged KeyMaker Board back to Joe in Australia

After purchasing a replacement KeyMaker Board, email me for the shipping address to post your damaged KeyMaker Board to.

Post your Damaged KeyMaker board to that address in Australia.

As soon as I receive your Payment, I will post the replacement KeyMaker board to your PayPal registered shipping address.

This is done to save time.

The replacement board will need to be activated.

Activation of a Replacement KeyMaker board to the same Functionality Level as your original board will ONLY OCCUR after I have received your damaged KeyMaker Board.

Please read all the information on this page BEFORE you contact Joe by email, on the Subject Line of your email type "Damaged Board shipping address request"

Orders will only be accepted from a Verified PayPal account 
Check the Status of your PayPal account before ordering

Purchase this replacement KeyMaker board to replace any of the following KeyMaker models;

KeyMaker 7 USB, KeyMaker 8 USB, KeyMaker 9 USB, KeyMaker 9A USB or KMX1.

Your replacement KeyMaker Board will be delivered to you with KMX1 Firmware, a new serial number and will need to be Activated with a new Activation Product key.

Activation of a Replacement KeyMaker board to the same Functionality Level as your original board will ONLY OCCUR after I have received your damaged KeyMaker Board.

Orders will only be accepted from a Verified PayPal account 
Check the Status of your PayPal account before ordering

All of Joe's KeyMaker replacement boards are shipped NOT Activated.

Replacement KeyMaker board will do NOTHING useful until it has been activated !

Activation of a Replacement KeyMaker board to the same Functionality Level as your original board will ONLY OCCUR after I have received your damaged KeyMaker Board.

Before you can use your Replacement KeyMaker board you must Activate it.

Replacement KeyMaker board will do nothing useful until it has been Activated, it will simply sit there if powered up and display a constantly flashing Green LED which is it's way of telling you it has not been Activated.

The Zap SVP will NOT work until after the KeyMaker board has been Activated.

Put simply, do not waste your time trying to use the replacement KeyMaker board until it has been Activated.

Follow this link to Activate a KM7-KMX1 replacement KeyMaker board

Follow this link to Activate a KMX2 replacement KeyMaker board